Skip to article
IES East MidlandsCollaboration model

A regional model for shared engineering facilities: East Midlands

A researched East Midlands briefing that connects official regional evidence to a regional model for shared engineering facilities, with practical decisions for FE engineering teams.

Reading time
9 minute read
Evidence
6 primary sources
Reviewed
15 July 2026
Next review
15 January 2027
0% read
Text 100%
In 90 seconds

Start here

Use the short route now, then open the evidence or practical sections when you need more depth.

What is changing?Multiple skills geographies

EMCCA covers Derby, Derbyshire, Nottingham and Nottinghamshire, not the whole statistical region.

Why it matters for further educationCurriculum decisions need evidence

A researched East Midlands briefing that connects official regional evidence to a regional model for shared engineering facilities, with practical decisions for FE engineering teams.

What to do this termBegin with one programme

Map specialist assets and current utilisation across willing partners

Governance
Multiple skills geographies

EMCCA covers Derby, Derbyshire, Nottingham and Nottinghamshire, not the whole statistical region.

Transition
Ratcliffe closed in 2024

The former power-station site is part of the East Midlands Freeport transition.

Technical base
Rail, aerospace and automotive

Major industrial assets coexist with logistics, food, space and SME supply chains.

Shared access model

Start with capability, not equipment

A successful partnership defines learning, access and accountability before it opens a specialist facility to learners.

01Define the need
02Agree access
03Run a pilot
04Review total value
How this resource is organised

Published evidence reports what sources say. IES analysis explains the curriculum significance. IES recommendations are professional judgements for providers to test locally.

01
Published evidence

What the regional evidence establishes

The published picture

This briefing asks: How can learners reach specialist equipment without every provider buying the same expensive capability? It uses published evidence available in July 2026 and distinguishes an announced ambition from demonstrated demand. The East Midlands spans Derby, Derbyshire, Nottingham, Nottinghamshire, Leicester, Leicestershire, Lincolnshire, Northamptonshire and Rutland. The region is not governed by one skills body. EMCCA covers Derby, Derbyshire, Nottingham and Nottinghamshire, while approved LSIPs and local authorities cover other economic areas. A regional claim therefore has to state its geography. That matters because a regional headline can conceal very different commuting patterns, employer structures and levels of access to specialist provision.

The East Midlands Combined County Authority states that its devolved skills activity is intended to improve progression into skilled work and apprenticeships. Its skills and employment programme includes the Adult Skills Fund, Skills Bootcamps and the EMCCA Careers Hub across Derby, Derbyshire, Nottingham and Nottinghamshire. These are delivery mechanisms, not proof that any particular course should expand, but they give curriculum leaders routes through which tested priorities can be acted upon. In this briefing, that evidence is tested specifically against specialist rigs, simulation, metrology, automation, high-voltage systems and controlled industrial environments, rather than treated as a general endorsement of provision.

What the evidence supports

The East Midlands Freeport links three tax sites around East Midlands Airport, Ratcliffe-on-Soar and the East Midlands Intermodal Park. Government and Freeport material positions the programme around advanced logistics, manufacturing and clean growth. Ratcliffe power station closed in September 2024, making the transition from a coal-generation site a particularly important regional context. Providers should treat the development timetable, tenant demand and occupational evidence separately rather than assuming every announced job requires the same engineering programme. In this briefing, that evidence is tested specifically against specialist rigs, simulation, metrology, automation, high-voltage systems and controlled industrial environments, rather than treated as a general endorsement of provision.

The region contains nationally significant technical employers and assets. Alstom builds trains at Derby, Rolls-Royce has major civil aerospace activity in Derby, Toyota manufactures vehicles at Burnaston, and Space Park Leicester connects space research, engineering and enterprise. These organisations illustrate the range of systems, quality and supply-chain practices in the region. They do not represent the whole SME economy, so curriculum validation must also include smaller maintenance, fabrication, controls and logistics businesses. In this briefing, that evidence is tested specifically against specialist rigs, simulation, metrology, automation, high-voltage systems and controlled industrial environments, rather than treated as a general endorsement of provision.

Limits and local tests

Space Park Leicester and university engineering facilities illustrate specialist regional capability, while colleges and employers hold automation, rail, vehicle and process equipment. An asset map should distinguish public access from partnership potential. It should not advertise equipment until the owner has confirmed capacity, supervision, insurance and permitted learner use.

A workable pilot could connect one provider with specialist metrology, automation or simulation capability to two neighbouring colleges. Partners should agree a common prerequisite task, a two-hour supervised practical, a portable evidence pack and a recovery arrangement for learners who cannot travel. Compare travel time from rural Lincolnshire, Rutland or Derbyshire with the learning time on the equipment. If access depends on a single technician or an employer production window, record that fragility in the business case. The pilot should report learner access by home provider and protected characteristic, alongside utilisation and cost, before any claim is made that the facility serves the region.

Further regional context

The evidence points to a technically diverse economy spanning rail, aerospace, automotive manufacture, power electronics, logistics automation, food manufacturing and low-carbon energy. It does not, by itself, prove that every college should add a new qualification. For a regional model for shared engineering facilities, local vacancy analysis, apprenticeship starts, learner destinations, employer interviews and staff knowledge remain necessary. Published strategies are most useful as a disciplined starting point: they identify developments to test, partners to approach and technical practices to explore.

02
IES analysis

What this means for a regional model for shared engineering facilities

Why this matters

The strongest curriculum question is not whether the region has an engineering skills shortage. That phrase is too broad to plan teaching. Teams need to identify specialist rigs, simulation, metrology, automation, high-voltage systems and controlled industrial environments. They should separate immediate vacancies from replacement demand, committed investment from aspiration, and a named software package from the underlying capability that will remain valuable when technology changes.

Regional variation creates a design challenge for a regional model for shared engineering facilities. A common core should secure safe practical work, engineering science, mathematics, drawings and data, measurement, quality, fault finding and technical communication. Local pathways can then use credible regional contexts. This protects learner mobility while allowing programmes to respond to employers. It also avoids creating provision so specialised that learners are trapped if an investment timetable changes.

Curriculum implications

There is a second risk in treating prominent employers as the whole economy when asking how can learners reach specialist equipment without every provider buying the same expensive capability? Large organisations can offer strong technical insight, specialist assets and clear standards, but many learners progress into SMEs, contractors and supply chains. Evidence panels should therefore include maintenance, production, design, service and infrastructure perspectives. Provider leaders should record whose voice is missing before declaring that consultation is representative.

Asset sharing fails when partners start with ownership rather than learning. The first specification should define the learner capability, prerequisite knowledge, supervision ratio, safe operating limits, evidence to be captured and reasonable adjustment. Only then should partners decide whether access requires travel to a specialist centre, remote operation, mobile equipment or staff exchange.

Questions to test

The true cost includes induction, consumables, maintenance, calibration, insurance, technician time, transport and timetable disruption. A memorandum should allocate responsibility for safeguarding, risk assessment, incidents, intellectual property and assessment. The pilot evaluation should report which learners gained access, not only overall utilisation, because travel and timetable design can quietly exclude apprentices, carers and disabled learners.

Key points to use
  • State the geography and evidence date on every curriculum proposal.
  • Describe occupational tasks and decisions, not only sector labels.
  • Test signals with large employers, SMEs, learners and destination evidence.
  • Prefer transferable capability where investment timing remains uncertain.
03
Try this in practice

Designing a credible FE response

How to use this

For FE engineering, the practical response is to examine shared modules, supervised access, travel planning, compatible timetables and explicit responsibility for quality. Begin with one programme and its intended destinations. Map the current sequence from introductory principles to independent technical judgement. Then mark where regional evidence changes the context, depth or order of learning. A new topic should not simply be added at the end of a crowded scheme of work.

Practical learning for a regional model for shared engineering facilities should reproduce the decisions made in work at an appropriate educational level. Learners need to plan, check, perform, diagnose, record and explain, not only follow a worksheet. Mathematics and science should be encountered where they control a real engineering decision. Digital tools should remain connected to physical systems, measurement and consequences. Sustainability should be treated through efficiency, materials, maintenance and whole-life trade-offs.

Delivery considerations

Use a bounded pilot evaluated for learning gain, utilisation, access, safety, staff workload and total cost. Assessment evidence should show why a learner selected a method, how results were verified and what would trigger escalation. Employer participation can improve authenticity, but the provider retains responsibility for learning, inclusion, safe practice and fair assessment. Projects using live data need explicit agreement about confidentiality, intellectual property and the developmental status of learner recommendations.

A first pilot should be deliberately small: one teaching team, one learner group and one occupational context in East Midlands. Before delivery, write down the baseline, intended technical improvement and evidence that will be reviewed. The pilot must address how can learners reach specialist equipment without every provider buying the same expensive capability? During delivery, collect learner work, teacher observations and structured employer feedback, while recording additional staff time and barriers to access. At review, compare the evidence with specialist rigs, simulation, metrology, automation, high-voltage systems and controlled industrial environments. Decide whether to stop, adapt or scale the change. Scaling should require a named curriculum owner, staff-development plan, realistic equipment and consumables budget, and confirmation that all learners can participate. This disciplined approach is slower than adding a fashionable topic to a scheme of work, but it produces a defensible curriculum decision and makes the next employer conversation more productive.

04
IES recommendation

IES judgement and next review

IES position

For a regional model for shared engineering facilities, IES recommends a ninety-day evidence-to-action cycle. In the first month, assemble published intelligence and test it through task-based employer conversations. In the second, audit the curriculum and staff confidence against specialist rigs, simulation, metrology, automation, high-voltage systems and controlled industrial environments. In the third, pilot one bounded change with defined learner evidence. Record decisions that were rejected as well as those adopted. This protects the programme from fashionable but weakly supported additions.

Success in a regional model for shared engineering facilities should be judged through learner capability and progression rather than the number of employer meetings or new pieces of equipment. Useful measures include practical independence, diagnostic reasoning, quality of technical records, retention, apprenticeship progress and destinations. Where numbers are small, combine quantitative evidence with moderated learner work and structured feedback rather than claiming a trend too early.

A proportionate response

This collaboration model briefing was reviewed in July 2026 and should be checked by January 2027, or earlier if a major investment, qualification reform or employer closure changes the context. Source links are provided for verification. Readers should check the publication date, geographic coverage and status of every programme before using it in a business case or public claim.

Action studio

Build your next-step plan

Select actions as you work through them. The checklist stays in this browser session unless you print or save the page.

Plain-language glossary

Terms used in this resource

FE
Further education: education and training commonly delivered by colleges and providers after compulsory school age and below or alongside higher education.
LSIP
Local Skills Improvement Plan: an employer-led assessment of skills priorities within a defined area.
Evidence register

Sources and review

These links were checked during the evidence review. External pages open in a new tab and may later be updated or moved by their publisher.

  1. 01 · East Midlands Combined County AuthoritySkills and employmentPublished or accessed Accessed July 2026. Open external source ↗
  2. 02 · East Midlands Combined County AuthorityEast Midlands Investment ZonePublished or accessed Accessed July 2026. Open external source ↗
  3. 03 · Department for Business and TradeUK Freeports programmePublished or accessed Updated 2025. Open external source ↗
  4. 04 · UniperRatcliffe-on-Soar power station closesPublished or accessed 30 September 2024. Open external source ↗
  5. 05 · AlstomAlstom in the UK and IrelandPublished or accessed Accessed July 2026. Open external source ↗
  6. 06 · University of LeicesterSpace Park LeicesterPublished or accessed Accessed July 2026. Open external source ↗

IES publication date: 15 July 2026

Evidence reviewed: 15 July 2026

Next scheduled review: 15 January 2027

Continue learning

Stay with East Midlands

Use this evidence alongside local employer insight, learner need and professional judgement.

1,673 words · Print-friendly

Stay close to the sector

Useful updates, occasionally.

New resources, sector briefings and opportunities to contribute to IES programmes. No noise.

By joining, you ask IES to send these updates. You can stop at any time. See privacy information.