IES Engineering Design Studio · Release 1

Beam Analysis Studio

Build a determinate beam, apply concurrent loads and inspect reactions, shear, bending moment, deflection and stress with the working visible.

IES Explore demonstrationProfessional and Institutional compatible
Structural modelSimply supported beam
1 active load
P1: 20.0 kNx = 3.00 mRₐ = 10.00 kNRᵦ = 10.00 kN
Left reaction10.00 kN
Right reaction10.00 kN
Maximum |moment|30.00 kNm
Maximum |deflection|6.750 mm
Maximum |stress|45.00 MPa
x 3.00 mV -10.00 kNM 30.00 kNmv -6.750 mm
Shear force diagram-10.000 kN at x = 3.00 m
0.0 m1.5 m3.0 m4.5 m6.0 m+10.0-10.0 Shear force diagram (kN) · IES sign convention shown about the zero line
Bending moment diagram30.000 kNm at x = 3.00 m
0.0 m1.5 m3.0 m4.5 m6.0 m+30.0-30.0 Bending moment diagram (kNm) · IES sign convention shown about the zero line
Deflected beam shape-6.750 mm at x = 3.00 m
0.0 m1.5 m3.0 m4.5 m6.0 m+6.7-6.7 Deflected beam shape (mm) · IES sign convention shown about the zero line

explore mode

Change one variable at a time.

Move a load, alter span or change section depth. Predict which result will change most before checking the diagrams.

Worked calculation

From equilibrium to curvature

1. Load resultant
W = ΣP + Σ(wℓ) = 20.000 kN

2. Equilibrium
ΣFᵧ = 0: Rₐ + Rᵦ - 20.000 = 0

ΣMₐ = 0: Rᵦ(6.00) - 60.000 = 0, so Rᵦ = 10.000 kN

3. Cut at x = 3.00 m
V(x) = -10.000 kN; M(x) = 30.000 kNm. Point loads create shear steps; UDLs change shear linearly. The gradient of M equals V between discontinuities.

4. Section response
I = bh³/12 = 6.6667e+7 mm⁴. σ = M/Z = 45.000 MPa.

5. Deflection
EI vʺ = M(x). Curvature is integrated along the beam with v = 0 at simple supports; a cantilever also has vʹ = 0 at its fixed end. At this cut, v = -6.7500 mm.

Analysis boundary

Educational beam theory, clearly scoped.