IES virtual engineering laboratories / utm-v2.1

Universal Testing Machine: models and verification.

Updated 9 November 2026. An original IES educational laboratory. All material profiles are illustrative assumptions, not measured or certified datasets.

One engineering model

Force, gauge extension, crosshead motion, engineering stress–strain graphs and results share the same state. Rectangular and dog-bone area is width × thickness; cylindrical area is πd²/4. Stress is F/A₀ and strain is ΔL/L₀. Physical speed is mm/min; playback changes elapsed viewing time only.

Ideal crosshead displacement equals gauge extension. Sections outside the gauge are treated as rigid. Initial grip separation is recorded separately and never substitutes for gauge length.

Material laws

V2.1 uses monotonic polynomial branches for ductile hardening, drawing and necking. Linear elastic regions, ideal yield plateaux and brittle responses remain straight. Every endpoint is sampled exactly; intermediate data are calculated from the constitutive law, with no display-only smoothing.

  • Low-carbon steel: 200 GPa. Linear elasticity and ideal yield plateau, followed by curved, decreasing-tangent strain hardening to UTS and progressive engineering-stress softening during necking. Knots (strain, MPa): (0, 0), (0.00125, 250), (0.02, 250), (0.15, 430), (0.25, 330).
  • Aluminium alloy: 69 GPa. Linear elastic onset followed by a saturating cubic hardening branch and progressive necking. The 0.2% proof stress is calculated by numerical offset-line intersection. Knots (strain, MPa): (0, 0), (0.00289855, 200), (0.08, 310), (0.12, 250).
  • Brittle polymer: 3 GPa. Ideal linear-elastic brittle fracture. No yield or plastic region is assumed. Knots (strain, MPa): (0, 0), (0.02, 60).
  • Ductile thermoplastic: 1.2 GPa. Elastic region, smooth post-yield softening, curved drawing and strain hardening, then progressive terminal necking. Illustrative and rate-independent. Knots (strain, MPa): (0, 0), (0.025, 30), (0.08, 22), (0.3, 24), (0.6, 38), (0.8, 29).
  • FDM/FFF polymer · flat / 0°: 2.4 GPa. Illustrative roads aligned with loading. Orientation presets are hypothetical educational profiles, not measured anisotropic datasets. Knots (strain, MPa): (0, 0), (0.015, 36), (0.035, 48), (0.055, 39).
  • FDM/FFF polymer · ±45°: 1.7 GPa. Hypothetical ±45° print profile. Infill, layer height, voids, temperature and interlayer damage are not modelled. Knots (strain, MPa): (0, 0), (0.015, 25.5), (0.05, 34), (0.09, 26).
  • FDM/FFF polymer · upright / Z: 1.2 GPa. Hypothetical weaker interlayer loading with brittle separation; no prediction of a particular printer or feedstock. Knots (strain, MPa): (0, 0), (0.018, 21.6).

Custom profiles validate positive values and a consistent yield, UTS and fracture ordering. Brittle custom fracture strain is UTS/E. Aluminium proof stress is calculated by intersecting σ = E(ε − 0.002) with the curve: approximately 208.861 MPa in this illustrative profile.

Numerical methods and outputs

A 400-interval strain grid includes the exact current endpoint, branch endpoints and proof intersection. More points alone cannot curve a linear material law. V2.1 calculates non-linear stresses before plotting and exporting them. The elastic data slope gives modulus; maximum engineering stress gives UTS for a completed test. A stopped test reports only its observed peak stress. External work accumulates trapezoids from the actual plotted/exported force–extension samples, converting N mm to joules. Independent analytic polynomial integrals check the numerical integration error.

At fracture an intact endpoint records pre-break force, followed by zero force at the same extension and time. The machine then stops. Loaded gauge elongation at fracture is distinct from post-fracture elongation measured after reassembly. Elastic/plastic extension at the final display refers to the immediately pre-break decomposition.

Supported inputs: section dimensions greater than zero to 100 mm; gauge length 5–200 mm; initial grip separation from gauge length to 300 mm; speed 0.1–100 mm/min. Tests exceeding predicted 100 kN or 200 mm travel are rejected before loading.

Verification

Independent hand calculations, checked with Decimal arithmetic, provide the engineering reference fixture. For steel with A₀ = 50 mm² and L₀ = 50 mm: at ε = 0.001, stress = 200 MPa, force = 10000 N and extension = 0.05 mm. Peak force = 21500 N, UTS = 430 MPa and sampled external work to fracture ≈ 231.525654 J (analytic polynomial integral ≈ 231.526042 J). The brittle polymer reference gives 3000 N, 1 mm and 1.5 J at fracture.

Automated tests cover geometry, stress/strain, elastic response, yield/proof, plasticity, peak stress, fracture, graph samples, numerical work, physical/playback timing, preparation, export and saved-record compatibility. Isolated account API tests verify owner-only retrieval and preservation of existing electrical/resource records.

Read the factual V2.1 release report →

Curved branches and saved history

For local branch position t from 0 to 1, stress is σa + (σb − σa)H(t). Steel hardening uses H = 2t − t² and necking uses H = t². Aluminium hardening uses H = 1 − (1 − t)³. Selected polymer drawing/softening branches use H = 3t² − 2t³. These monotonic functions do not overshoot the stated endpoints or UTS.

V2.0 investigations retain their original 217.609375 J steel work, 202.914 MPa aluminium proof value and straight-segment dataset. They reopen read-only with their original model version. New V2.1 results use the curved law; model version is shown in records and exports.

Limitations

No machine compliance, grip slip, true stress, temperature, strain-rate sensitivity, unloading/hysteresis, local damage, calibration, experimental uncertainty or real sensor integration is modelled. Printed orientations are hypothetical curves. Necking and fracture shapes are qualitative strain-driven indicators, not local area or crack-propagation calculations. Work is specimen-dependent, not intrinsic fracture toughness.

The SVG machine has an optional flat 2D view. Reduced-motion settings disable decorative transitions; graph labels, keyboard sliders and focus indicators remain available.

Records and teaching

Five practicals include objectives, theory, optional predictions, preparation, measurements, calculations, interpretation, worked examples and lecturer notes. Independent worked answers are gated until test termination and learner evidence. CSV, JSON and standalone HTML reports are available without an account. My IES saving uses existing member authentication and owner-scoped laboratory records, with the model version and complete numerical dataset. Reopened records are read-only.

Lecturer guide, worked calculations and questions →

British and international technical references

Current UK designations and public scopes verified with BSI on 9 November 2026:

  • BS EN ISO 6892-1:2019 : metallic materials; method of tensile test at room temperature.
  • BS EN ISO 527-1:2019 : plastics; general principles for determining tensile properties.
  • BS EN ISO 527-2:2025 : test conditions for moulding and extrusion plastics. This edition replaced BS EN ISO 527-2:2012 in June 2025.

The simulator matches these references to the selected material family and records the designation in the results table, CSV and downloadable report. For FDM/FFF profiles, only Part 1 is assigned automatically: Part 2 is not presented as directly applicable because its stated scope is moulding and extrusion plastics. A user-defined material requires the educator to select an appropriate reference.

These standards are technical references only. The full specimen, conditioning, test-rate, extensometry, machine verification, uncertainty and reporting requirements have not been independently validated against this simulation. No BS, EN or ISO-compliant or calibrated testing is claimed.

Corresponding international source publications include ISO 527-1:2019 and ISO 6892-1:2019.

Functional benchmarks: Instron table systems and ZwickRoell testing components. The IES machine and controls are original. No endorsement or copied proprietary interface is implied.

Return to the laboratory →